Round Beads

Frequently asked questions

• What is a smooth round gemstone bead?

  A round bead is a sphere cut from gemstone rough and polished smooth — no facets, no flat edges. Standard rounds are center-drilled straight through the bead so the hole runs pole-to-pole. The geometry makes them the most predictable cut to design with: they sit cleanly on flex wire, stack uniformly on stretch cord, and read as a clean color block without the light play of a faceted surface. Rounds are typically calibrated to nominal sizes (4mm, 6mm, 8mm) within standard trade tolerances, though softer or more fractured stones can vary a half-millimeter strand to strand.
• What sizes does Dakota stock in round?

  Round is Dakota's deepest cut by volume. Current stock concentrates in 8mm (554 strands), 6mm (477), 4mm (353), and 10mm (342) — the four sizes that cover most beaded jewelry work. Smaller 2mm and 3mm rounds (54 and 140 strands) work for accent spacers and fine-gauge stringing. 12mm (50) and 5mm (28) are stocked in narrower stone selections. Sizes are nominal; actual diameter can run ±0.3mm depending on the stone and lot, so for tight calibration work pull from a single strand where possible.
• What stones come in round cut?

  Almost every stone Dakota carries is available as round somewhere in the range. The deepest selections are agate (195 strands across varieties), jasper (149), quartz (134 — clear, smoky, rose, rutilated, and more), and turquoise (107). Garnet (68), tourmaline (64), moonstone (58), opal (55), DZI agate (53), and tiger eye (48) all hold meaningful stock. Less common stones may only appear in one or two sizes — if you need a specific stone-size pairing, filter the collection or check the size tags on individual products before ordering.
• What jewelry work are round beads best for?

  Rounds are the default cut for stretch bracelets, mala-style strands, classic beaded necklaces, and anywhere you want the stone's color and pattern to read without faceted sparkle. They sit predictably next to metal spacers, knot cleanly between cord, and don't catch on fabric the way faceted edges can. 6mm and 8mm are the workhorse sizes for adult bracelets; 4mm suits layered necklaces and children's pieces; 10mm and 12mm carry as statement strands or focal sections. For mixed-cut designs, smooth rounds pair well with faceted rondelles or heishi as a textural counterpoint.
• Smooth round vs faceted round — how do I choose?

  Smooth rounds emphasize the stone itself — color, pattern, inclusions, chatoyancy. Faceted rounds (a separate cut in the catalog) cut small flat planes across the sphere to add light return, which reads as sparkle but slightly mutes the underlying pattern. For stones with strong figure — ocean jasper, dendritic agate, picture jasper, moss agate — smooth round shows the material better. For uniformly colored stones — garnet, amethyst, smoky quartz — faceted rounds add visible movement. Both drill the same way, so they swap cleanly in a design if you want to test the difference on a sample strand.