16-Inch Gemstones

Frequently asked questions

• What is a 16-inch strand and why is it the trade standard?

  A 16-inch strand is the working length most US jewelry designers buy for design-grade work — necklaces, multi-strand layouts, and bulk component sourcing. It gives enough beads to lay out a full 18–20 inch necklace with clasp and findings, or to cut down into shorter assemblies without running short. The 16-inch length has been the trade default for decades because it standardizes pricing and bead-count math across stones and cuts. Dakota's 16-inch hub covers the full catalog at this length, across rounds, rondelles, faceted cuts, cubes, coins, and shape work. The bracelet counterpart is the 8-inch strand.
• How many beads per 16-inch strand at common sizes?

  Approximate bead counts per 16-inch strand assume snug-strung beads with no spacer drift. At 2mm you get roughly 200 beads, at 3mm about 135, at 4mm about 100, at 6mm about 66, at 8mm about 50, at 10mm about 40, and at 12mm about 33. Faceted cuts, rondelles, and irregular shapes (pebble, nugget, coin) vary — count is driven by the bead's drilled axis, not its widest dimension. Exact count should be disclosed; ask before buying if a piece-count is critical for your design and isn't specified.
• 16-inch vs 8-inch — which length for which project?

  16-inch is the necklace and design-strand length: enough material for an 18–20 inch finished necklace, multi-strand torsades, long earring drops, or component cutting. 8-inch is the bracelet length: pre-cut to the wrist standard, sized for stretch-cord bracelets and single-wrap pieces. Designers running production bracelet lines typically buy 8-inch to skip the cut-down step; designers doing necklace work, statement pieces, or mixed assemblies buy 16-inch for the bead count and pricing efficiency. Both lengths share the same stones and cuts where stocked — the choice is about finished-piece geometry, not material grade.
• What stones and cuts does Dakota carry in 16-inch?

  The 16-inch hub spans the full catalog. Most-stocked stones include agate, turquoise, quartz, jasper, tourmaline, moonstone, garnet, labradorite, opal, and amazonite, with deeper coverage across feldspar, chalcedony, and silica varieties. Cut coverage runs from smooth round and faceted round (the largest categories) through rondelle, microfaceted round, pebble and nugget, cube, table-cut cube, faceted cube, and coin. Standard sizes are 4mm, 6mm, 8mm, and 10mm, with 2mm and 3mm in microfaceted work and 12mm in larger statement rounds. Filter by stone, cut, or size to narrow the grid.
• How does Dakota measure 16-inch strand lengths?

  Strand length is measured end-to-end along the drilled axis, beads strung snug with no gaps. A 16-inch strand can run 15.5 to 16.5 inches depending on bead shape and how the cutter finished the temporary string — irregular shapes (nugget, pebble, raw-faceted) sit at the looser end because the drill points don't always center on the bead's midline. Bead count per strand reflects this variance. Length and approximate count should be disclosed; if you need a tight tolerance for a calibrated production run, ask before buying so the team can pull and measure before shipping.