Large Hole Gemstone Beads

Frequently asked questions

• What is a large hole bead and what cord does it fit?

  Large hole beads are drilled with an oversized channel — typically 2mm or larger — so cord, leather, or memory wire passes through where a standard 0.7–1mm stringing hole would not. Standard gemstone strands are drilled for beading wire and silk; large-hole strands open the option to use 1mm and 1.5mm round leather, 2mm flat leather, paracord, kumihimo bundles, and heavier silk satin cord. Always check the listed hole size against the cord diameter before buying — cord should pass freely without forcing, since stone holes do not stretch. Hole size should be disclosed; ask before buying if it isn't specified.
• What hole size do Dakota's large-hole strands carry?

  Most large-hole gemstone strands in this collection are drilled at 2mm or 2.5mm, with some specialty drills running larger for thicker leather and paracord. The exact bore varies by stone, cut, and bead size — softer materials like amazonite and lapis tolerate a wider drill than harder stones like quartz at the same diameter. the listing lists the drilled hole size for each strand; if it isn't specified on a listing, ask before ordering so the bore matches your cord. For mixed-strand designs, confirm hole size on every strand rather than assuming consistency across the category.
• What are large hole beads used for?

  The four common applications: leather-cord bracelets and necklaces (1mm–2mm round or flat leather), kumihimo braids where the finished cord threads through a focal or end bead, memory wire bracelets that use 0.6–1mm wire but benefit from looser bead fit, and European-style charm bracelets built on heavier chain or cable. Large-hole strands also work for macramé spacers, paracord survival bracelets, and any design where the cord, not a beading needle, carries the bead. The wider channel changes the drape — beads sit looser on cord than tight-strung designs, which is part of the intended look.
• Which gemstones are available with large holes?

  The category spans quartz varieties (clear, rose, smoky), jaspers, agates, amazonite, amethyst, larvikite, tiger eye, lapis, garnet, and freshwater pearl, among others. Round is the dominant cut at 8mm and 6mm, with rondelles and faceted rounds also well represented. Availability shifts as strands sell through, so the exact stone-by-size mix changes — filter by stone or cut from the collection page, or check the active listing for the size and hole bore you need. Softer stones generally drill to wider bores more reliably than harder, brittle materials, which affects which stones appear in 2.5mm+ drill sizes.
• How do bead diameter and hole size relate for cord fit?

  Bead diameter and hole size are independent specs — an 8mm round can be drilled at 1mm or 2.5mm depending on the strand. For cord work, the hole bore is what matters: 1.5mm leather needs roughly a 2mm hole to pass cleanly, and 2mm leather wants a 2.5mm bore or larger. Diameter affects drape and visual weight, not whether the cord fits. A common build is 8mm rounds on 1.5mm leather, or 6mm rounds for finer cord and lighter wrists. Check the listed hole size on each listing before matching to cord, and account for knots or crimps at the cord ends.